Multiplex Tucan Kit

MSRP: $299.99
(You save $140.00 )
(No reviews yet) Write a Review
12.00 LBS
$20.00 (Fixed Shipping Cost)

Construction: Elapor foam, white in color with birch plywood side
panels in fuselage
Wings: Two-piece Elapor foam with birch plywood reinforcement, carbon
reinforced plastic spar
Aileron Control Dual servo
Spinner: White plastic 2.2" (55mm)
Landing Gear: Fixed tricycle type with 2.2" (56mm) rubber wheels
may be fitted with optional retracts
Canopy: Vacuum molded smoke tinted plastic



Multiplex Tucan Aerobatic Airplane Kit, with Canopy, Decals, Plywood
Reinforcements and Instruction Manual



Radio: 6-channel with receiver
Servos: Five micro with metal gears
12" (300mm) Servo Extensions: Four
Motor: Multiplex offers the #33 3663 Power Set (not carried) that
includes a HIMAX C 3528-1000, 55A ESC, LiPo Battery, Propeller
and hardware
Battery: 3S 11.1V, (The Multiplex #15 7371 battery is recommended
but not carried by us. The FlightPower Pro 50 3600mAh 3S 11.1V
 is compatible. If using the ESC in the #33 3663 Power
Set, the battery connector must be changed to a Dean's Ultra Male
 to mate with this battery.
Battery Charger: Compatible with selected battery
LiPo charging bag
Building and field equipment



Wingspan: 51.2" (1300mm)
Overall Length: 43.7" (1110mm)
Total Weight: 65.2oz (1850g)
Wing Area: 496 sq in (32 sq dm)
Wing Loading: 19 oz/sq ft (58 g/sq dm)
Configuration: Low wing
Airfoil: Semi symmetrical
Center of Gravity: 3.5" (90mm) aft of the wing root leading edge
measured at the fuselage
Control Throws-
Elevator: Up 0.39" (10mm), Down 0.31" (8mm) 20% Expo
Rudder: Right to Left 0.59" (15mm) 10% Expo
Ailerons: Up 0.59" (15mm), Down 0.47" (12mm) 20% Expo
Nosewheel: 0.31, 031" (8, 8mm)



This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the

Sign Up For Newsletter